The Effect of Temperature on the Activity of the Enzyme Catalase
[Your name] · Lab partners: [Names] · [AP Biology, Period 2] · [Teacher’s name] · Date performed: [October 28, 2026] · Date submitted: [November 4, 2026]
Abstract
One paragraph (150–250 words): purpose, method, key results with numbers, and conclusion.
This experiment investigated how temperature affects the rate of reaction of catalase, an enzyme that breaks down hydrogen peroxide into water and oxygen. Filter paper discs soaked in potato catalase extract were placed in 3% hydrogen peroxide at six temperatures from 0 °C to 70 °C, and the time for each disc to rise to the surface was recorded as a measure of oxygen production. Three trials were completed at each temperature. Reaction rate increased from 2.4 at 0 °C to a maximum of 11.5 (×10⁻² s⁻¹) at 37 °C, then fell to 6.9 at 50 °C; at 70 °C no discs rose within 120 seconds. The results support the hypothesis that catalase activity increases with temperature up to an optimum and then decreases sharply as the enzyme denatures.
Introduction
Enzymes are proteins that act as biological catalysts, lowering the activation energy of reactions in cells. Catalase is found in almost all organisms that use oxygen and protects cells by breaking down hydrogen peroxide (H₂O₂), a toxic by-product of metabolism:
2 H₂O₂ → 2 H₂O + O₂
As temperature rises, molecules move faster and collide more often, so enzyme reactions usually speed up. However, high temperatures break the weak bonds that hold an enzyme’s three-dimensional shape, changing its active site so that the substrate no longer fits. This process, denaturation, causes the reaction rate to drop.
Hypothesis: If the temperature of the catalase and hydrogen peroxide increases from 0 °C to 37 °C, the rate of reaction will increase, because molecular collisions become more frequent; above about 40 °C the rate will decrease because the enzyme begins to denature.
Variables
Independent variable: temperature (0, 10, 20, 37, 50 and 70 °C)
Dependent variable: time for the disc to float (s), converted to rate (1/time)
Controlled variables: H₂O₂ concentration (3%), volume (20 mL), disc size (6 mm), catalase extract source and soaking time (5 s), container size
Materials
Fresh potato, blender, distilled water, cheesecloth
3% hydrogen peroxide solution
Hole-punched filter paper discs (6 mm)
Six 50 mL beakers, forceps, stopwatch, thermometer
Ice bath and water baths at 10, 20, 37, 50 and 70 °C
Safety goggles and gloves
Methods
50 g of potato was blended with 100 mL of cold distilled water and filtered through cheesecloth to produce the catalase extract.
20 mL of 3% H₂O₂ was placed in each beaker, and the beakers and extract were brought to the test temperature in the water baths for 10 minutes.
Using forceps, a filter paper disc was dipped in the extract for 5 seconds, blotted briefly and dropped to the bottom of the beaker.
The stopwatch was started when the disc reached the bottom and stopped when it reached the surface.
Steps 3–4 were repeated for three trials at each temperature, using a fresh disc each time.
If a disc did not float within 120 seconds, the trial was recorded as “>120 s”.
Rate was calculated as 100 ÷ average time (×10⁻² s⁻¹).
Results
Table 1. Time for catalase-soaked discs to float in 3% H₂O₂ at different temperatures
Temperature (°C) | Trial 1 (s) | Trial 2 (s) | Trial 3 (s) | Average time (s) | Rate (×10⁻² s⁻¹) |
|---|---|---|---|---|---|
0 | 41.2 | 38.9 | 44.0 | 41.4 | 2.4 |
10 | 25.3 | 27.1 | 24.8 | 25.7 | 3.9 |
20 | 15.6 | 14.9 | 16.2 | 15.6 | 6.4 |
37 | 8.4 | 9.1 | 8.7 | 8.7 | 11.5 |
50 | 13.8 | 15.2 | 14.1 | 14.4 | 6.9 |
70 | >120 | >120 | >120 | >120 | <0.8 |
Figure 1 (attach your graph): a line graph of rate (y-axis) against temperature (x-axis) shows the rate rising steadily from 0 °C to a peak at 37 °C, then falling steeply, with almost no activity at 70 °C.
The fastest reaction occurred at 37 °C. Variation between trials was small (within 2.6 s at every temperature that produced floating discs).
Discussion
The results support the hypothesis. Between 0 °C and 37 °C, the rate of reaction increased nearly fivefold, consistent with more frequent collisions between catalase and H₂O₂ molecules as kinetic energy increased. The peak at 37 °C suggests an optimum temperature at or near this value, although with no data between 37 °C and 50 °C the true optimum could lie anywhere in that range. Above the optimum, the rate fell to 6.9 at 50 °C and to almost zero at 70 °C, which indicates that the catalase was denatured: its active site changed shape so that H₂O₂ could no longer bind.
Sources of error and improvements
Temperature control: water bath temperatures varied by about ±2 °C, and the beakers began to cool once removed. Using a thermostatically controlled water bath and timing inside it would improve accuracy.
Extract absorption: the amount of extract absorbed by each disc may have varied with how long it was blotted. Using a micropipette to add a fixed volume (for example 10 µL) to each disc would standardise this.
Human reaction time in starting and stopping the stopwatch adds error of roughly ±0.3 s, which matters most at the fastest times. Video recording the trials would reduce this.
Limited temperature range: testing at 5 °C intervals between 30 °C and 50 °C would locate the optimum more precisely.
Further investigation: repeat the experiment with catalase from another source (such as liver or yeast) to compare optimum temperatures, or investigate the effect of pH on catalase activity.
Conclusion
Catalase activity increased with temperature from 0 °C to a maximum at 37 °C and then decreased sharply, falling to almost zero at 70 °C. This supports the hypothesis that enzymes have an optimum temperature, above which they are denatured and lose activity.
References
[Campbell, N. A., Urry, L. A., Cain, M. L., Wasserman, S. A., Minorsky, P. V., & Orr, R. B. (2020). Biology (12th ed.). Pearson.]
[Your lab manual or handout title, teacher or institution, year.]